ORIGINAL: Kristoffer_E
ORIGINAL: Dads like rc too
If it's too lean it will just stall.
Istart the truck, LEAVE THE IGNITOR ON, and hit the gas, and the engine just stops. If Istart it at partial thottle and hold the truck while Ipull off the starter, then it runs like a champ until its allowed to idle for 3+ seconds, and then when Igo to accellerate it bogs a little but runs. Ithink factory default on the LSNis like 2 1/2 turns out, mine is darn close to that, (so farily rich on the LSN), but it still basically stalls when Itry to go from a complete stop...
if it's bogging down but will recover by letting off the throttle it's probably too rich. Turn the LSN in about 1/4 to 1/2 a turn and try it out.