Hey guys!

Recently I bought a new VSTANKM1A2 Abrams after my issue with my HENGLONGType 90 tank.
Ithought this gonna be a good experience but alas, it was short living.

The main issue is with the veering/pulling to one side when speeding forward/backward using the new VTX-10 controller.
Ihave posted an example of what Imean at http://plexure.com.sg/IMG_0927.MOV

Since it was only 1 hour old, Icall up my distributor and went to their warehouse today.
As expected, the tank did as per the video.

I'm glad the distributor is willing to provide a 1-to-1 exchange.
Hegive me a new M1A2 VSTANK and let me test all I want.

Igive it another shot at their testing platform and it works well for 15 minutes.
Then the problem came again.
That is like 2 new M1A2 VSTANKhaving the same issue!

The distributor suspect the motor is overheating and thus the veering after 15 minutes of playtime.
He is helping me ask VSTANK whether they have change the motor supplier and cause this batch of production to be defect.

On my part, am Iexpecting too much?
Is it true that all RCtanks cannot be run for too long using speed forward/backward?