Thought I would also post some of the other projects I am working on too. The first pic shows a Dragon that had an encounter with, well - fire. Not an inferno but enough to cause some heat damage to areas of the airframe. All were repaired, the areas are in primer just awaiting paint.

In back of that is a large Extra that needed some TLC. Closed some switch holes, repaired the wheel pants, the rudder and one elevator. Also just awaiting color.

The next pic is the stab from the Richthofen Phantom of which I have a thread going on. I've taken over the dining room table to apply the Filte Metal. At least I can be upstairs with my wife while I work. Just have to install some heat blanket in the fuse while I have easy access then it gets panel lines and rivets. Ready for paint. Alot of airbrushing is required for the Phantom, will be one of my most favorite jobs when comeplete. Not too much longer Billy...

Next is my Reaction collecting dust. Most of the paint work is complete, needs some polishing and rigging. Hope to have it ready for mid summer or so. The guys from my club pitched in to have it built for me being that I didn't have much time to do many things last year. My mom had been in the hospital, since passed. Couldn't wish for better friends.

The F18 is a YA single. Been ready for paint since late 2007. Was originally going to be ducted fan but then was introduced to the turbine world. Could use a P60 for it, maybe go electric. Geez, batteries are expensive....

The B17 is foam! Just set it up and I can go fly a bomber.

Dan