ORIGINAL: 123Cat

Yes Mr Ragla , I like pain , and there is plenty of it here

its the 1.5cc , Im doing by the way


the ones Fiery sent me

With a new crank ,rod, and piston and contra this one might run , its got 140 exh timing and 25 degree cone on the piston top , stock is 21and no sub piston induction the fit is loose half way up compression and then its good the rest , it burps in the garage so I think its a goer

Its got a tiny 2.5 mm piston pin that might break , but Im hoping ,

Im running it tomorrow <br type=''_moz'' />