RCU Forums - View Single Post - Tamiya DMD T-03 - doesn't work properly PROBLEM SOLVED
Thread: Tamiya DMD T-03 - doesn't work properly PROBLEM SOLVED
View Single Post
Old 03-30-2012 | 03:26 PM
  #5  
kclank's Avatar
kclank
 
Joined: Jun 2007
Posts: 1,272
Likes: 0
Received 0 Likes on 0 Posts
From: Port Angeles, WA
Default RE: Tamiya DMD T-03 - doesn't work properly PROBLEM SOLVED

ORIGINAL: yellowshaker

Are you absolutely sure that the reciever is plugged in correctly? Sound slike that might be the problem. Or...motor leads are in the wrong configuration. Again, a possibility. I would recheck these things first, as the rudder tim should hardly ever need to be touched on the tamiya.

sounds like motor leads to me also
kclank is offline  
Reply Like