I got the plane up for a short flight before dark last night, after a little change in elevator trim it flew great. I really noticed a difference in knife edges, it took full rudder before to hold a knife edge with about 3/4 throttle and this time it took very little rudder and less then half throttle. When landing the approach was good and no more wing drops, but as it got a few feet from the ground I found I was using a lot of elevator to hold the nose up and by the time I was at full elevator it stalled and nosed in. No damage to the plane, just my ego. Also I had to still put up trim in the elevator, could it be that I need to move the CG more? There was definitely a change for the better but it seems like this plane wants to come in hot especially just before flair to keep the nose up. The plane doesn't really float on it's wings on landings.