I have been debating on which plane to get as my first 3d plane. I have looked at the OMP 540P but don't really like the profile fuse. I like planes that at least somewhat resemble real planes. I looked at the Weston UK Cougar 2000 and had the same complaint. My question is, what would be a good plane to get that still looks like a real plane. I have Ikarus Aerofly Professional and can fly the aerobatic planes easily. I am not very good at 3d yet but can do knife edge and these spin things (Both sticks in the same corner, upper left or upper right, or reverse the elevator and do it inverted). I am learning to hover but am not very good yet (I can only hover for a few seconds). By the time I would get this built, I would be a lot better. I don't care if it is a kit or arf but would prefer kit. Any imput would be great!