RCU Forums - View Single Post - New Blade 450 3D up in smoke!!!
View Single Post
Old 06-08-2012, 11:15 AM
  #8  
Rustproofcorn
Senior Member
 
Join Date: Dec 2011
Location: Nikiski, AK
Posts: 166
Likes: 0
Received 0 Likes on 0 Posts
Default RE: New Blade 450 3D up in smoke!!!



even if what your saying is what i SHOULD do i would come back with this information should be in the manual which in turn wouldnt be user error but infact an error on E-flights end. i highly doubt after 4 flights i damaged the battery in such a way that made it fail as you say. also i didnt fly the helicopter for 15 minutes strait but in reality there were ajustments i was making with trim and such. i never ran the battery completly out i have mine set up for 6minutes actuall flight time so that i dont over discharge which is in the manual which i read. anyhow i did feel thrown under the bus a little but thats ok if that is your way of telling people what you think. i will look at getting some velcro for my packs.