ORIGINAL: Pah co chu puk

I think I have fixed it. I switched out the RX-18 and the 3 wire harness and have now gone through 5 start up/ shut down cycles with no problems. It works perfect now. <div>
</div><div>I did some other tests before switching the main board and they did not help. This seems to have solved the problem.</div><div>
</div><div>Thank you all for the great advice. With your help I was able to find the pathway to a solution faster than I could have on my own. Now I'm going to e-mail Phil so he can relax a little, I know he is busy right now.</div>