I have the engine mounted and the throttle push rod hooked up.
I found the inner rod for the throttle push rod was missing from the kit, The excess from this rod is what also acts as bearings for the rest of the solid wire pushrods. [:@][:@][:@] I had another pushrod for the throttle in my stock but unfortunately I had already glued in the outer rods for the elevator and rudder and I need the missing rod to complete that installation. Looks like I will be making a phone call tomorrow to get a replacement sent out.
I will be able to contniue on the build since I was able to get the throttle connection completed.
Later!!
Anthony