RCU Forums - View Single Post - Sig 1/4scale C/W Cub build
View Single Post
Old 08-04-2012 | 05:16 PM
  #2071  
swixtt's Avatar
swixtt
 
Joined: Jan 2005
Posts: 608
Likes: 0
Received 0 Likes on 0 Posts
From: , BC, CANADA
Default RE: Sig 1/4scale C/W Cub build


ORIGINAL: RH

Sorry for the delay on the pics of my fuel tank setup. We've had great flying weather for a change and I've been taking advantage of it. As I mentioned earlier, I modified the bottom of the fuselage aft of the fire wall so it would be removable in order to provide easy access to the fuel tank and plumbing. In order to get the tank in a good elevation relative to the carb, I used foam blocks to give it good support. The SIG manual (it's real old) suggested hanging the tank with by rubber bands, but that didn't seem very practical to me. Here are some photos of how it's configured.

Rick...
hi rick
looking at your engine fuel lines and vent etc. is your CC vent capped off? what is the other line next the fuel inlet on the carb??
i'm considering that exhaust.. looks VERY nice