OK. If you don't agree with me, you can at least listen to the RC manufacturers. Maybe they know what they are talking about. Here is Futaba's advice:
Guidelines for setting up gasoline engine models.
All ignition equipment, including an electronic kill switch, must be mounted at least 12", and preferably 14", away from all radio equipment, including throttle servos, etc. Ignition kill switch should always be on opposite side of fuselage from radio kill switch. All pushrods going to anything related to the engine must be non-conductive (just nonmetal clevises is not sufficient).

I'll attach a couple of emails I got from JR and Hitec. Dan.