Hey guys!!!
Just programmed my final pic chip for today. Took it outside to the engine test stand and plugged it into the timer board. Flipped on the power, primed the engine, one 2 finger flip and it roared to life!
Beauuuutiful idle, instant transition to high throttle and I gained another 200 rpm!
This one is a keeper.
Went back to the second source file that compiled with no errors, edited my curve in excel, pasted and ran MPLAB x for the compile. There were missing symbols, so I used the suggested fixes mplab's debugger gave me(great help hints by hitting alt-enter), fixed them all and compiled with no errors!!!!
I was ecstatic! Tears of joy. I have now what I consider to be a great advance curve. I will test again tomorrow but this hex file definitely works on my engines without a doubt!

Thanks Jake !!

John