RCU Forums - View Single Post - BJCRAFT

09-28-2012, 02:08 PM

#1

rosnik

Join Date: Oct 2002

Location: 1000MIGLIA CITY, ITALY

Posts: 80

Likes: 0

Received 0 Likes on 0 Posts

BJCRAFT - MONOLOG 70 FOR 50E -

Hi Rc flyers ,
I want to introduce you my new BJ PARK MONOLOG 70 www.bjcraft.com .

Wing Span: (1500mm)
Length

1600mm)
Flying Weight: 2800g with battery

I chose this model like easy transport F3A practice plane.
After one mail with Mr Bond of WWW.BONDAERO.CO.UK on 3 days I got the big box at my home.
Like you can see in pictures the Box is really big, the plane is perfectly packet and all come me without wrinkles or damages.
The Monolog 70 is a real nice plane and fine project .
The aerodynamic study Mr. Park get on the project is perfectly showed in fly and in building.
The film covering is nice and the color real attractive , building is easy and instructions nice, Carbon fiber wing baionet is present.
The hardware is good , fiber gear apart .
About the gear Mr. Park suggest one wire gear this to not get canalizer effects .
Wile I replaced wit one on thin Carbon fiber gear.

My power set-up is:
Hacker A50-14S - ESC 70Ah w.Bec Hacker, 5S 4000 APC 16X8 0r 17x8 , 4 x align 610 servos and Futaba 2.4 GHz receiver.

Flying:
The Monolog Fly is like F3A plane.
It fly great but best is the knife-edge fly, you can easy perform knife loops, knife Cuban 8s and all the F3A program with out problems,
great is in slow rolls and points rolls.
It fly like bigger plane , like one 2mt F3A .

Building notes:
1)The correct, suggested and build in, setup is:
Stabilo = 0°
Main Wing = + 0,4°
Motor = + 1,5 ° ( yes , UP trust. That's correct!