RCU Forums - View Single Post - Converting to Electric
View Single Post
Old 09-29-2012 | 12:26 PM
  #4  
blvdbuzzard
 
Joined: Jun 2002
Posts: 3,717
Likes: 0
Received 4 Likes on 4 Posts
From: high deserts, CA
Default RE: Converting to Electric

Well for a 60 2s conversion, a Tacon 60, APC 18X6, to 20X6 prop, 6s 55000mah battery, 60 amp ESC. I have this in two planes right now and they have plenty of power. Now, I am a patient person and use a small charger. It takes about an hour or so to charge the batteries. I just have more batteries so I am charging and flying.

Battery
http://www.hobbypartz.com/98p-25c-5500-6s1p.html

Motor
http://www.hobbypartz.com/96m606-big...030-400kv.html

ESC
http://www.hobbypartz.com/07e06-proton-60a.html

Charger
http://www.hobbypartz.com/60p-dyc-1004.html



This setup puts out plenty of power to fly a 9 pound plane.

Buzz