RCU Forums - View Single Post - Easytiger Models Grumman Cougar
View Single Post
Old 11-14-2012 | 01:14 PM
  #9  
Eddie P's Avatar
Eddie P
My Feedback: (4)
 
Joined: Feb 2003
Posts: 1,920
Likes: 0
Received 2 Likes on 2 Posts
From: Reno, NV
Default RE: Easytiger Models Grumman Cougar

I have not had much time to keep up with the latest jet model offerings in recent months but I have to say this Cougar is interesting to me. It's pretty large for a Cougar! It must have a massive amount of wing area and would probably be perfect for an unused P-60 or MW-54 I imagine for those not inclined to use a 110 or 120mm fan.

Could you post a little more about some of the details of the Cougar? Fuse length, wing area, etc? Just thinking roughly, the fuse has to be at least 72 inches or so based on basic dimensions unless the wing is really over sized... Comparing this one to the JHH Cougar at a 47" wing it's clearly larger but is not quite as scale looking at least in the few photos I can see. With some scale looking gear and gear doors, a little bling with the paint scheme and a cockpit/pilot it might well go a lot farther in the sport scale category.

Very interesting. Please post a lot more with your build.