RCU Forums - View Single Post - Hitec HS-225MG and 6.6v A123
Thread: Hitec HS-225MG and 6.6v A123
View Single Post
Old 12-25-2012 | 04:52 AM
  #4  
Giant_Scale_Gasser
My Feedback: (84)
 
Joined: Aug 2012
Posts: 247
Likes: 0
Received 1 Like on 1 Post
From: Spring Hill, FL
Default RE: Hitec HS-225MG and 6.6v A123

ORIGINAL: Neddy191

Hi, I've searched a little and found some opinions about this but I felt I'd ask again for more current opinions.

I'm planning on using a HS-225MG for the throttle on the 1/4 scale cub I'm building. I'm looking at going with a 6.6v A123 for my flight battery and was wondering if I should worry about any problems since they're only rated through 6.0v. I don't really want to put a reg in this plane.
I run all my Hitecs (probably 60 of them in service between 12 airplanes I fly) on 6.6 LiFe chemistry. I have 225BB & 225MG running every weekend on 6.6v with not a single issue. Juts my 2 cents.

Giant_Scale_Gasser is offline  
Reply Like