Hi Guys Here are is the parts list for my drive shafts, It is nessesary to use a lathe to cut down diametersto make things fit togather. adrill and a file could beused if you are handywith it. and a 4mmream isneeded and a die to cut the threads on the end. thisisfor the small 26" boards. May not be a help if you arn'tin the US ordont have the tools.
http://www.mcmaster.com/#catalog/119/1123/=lmij2e
http://www.mcmaster.com/#catalog/119/153/=lmile2
http://www.mcmaster.com/#stainless-s...shafts/=lmimd2
John-Quadcopters don't swim as good as surfers.
Saildog- Great to hear fromyou!!!!!
Jimi-Hope you are doing good !!!!
Resinator-On my 40"board 10" wideI put a Leopard 4082 1000kv and on 6 cells it goes around 30mph
Aloha, Karl