Hi everyone,
I am setting up my 1st big electric, an EF 104" Extra, with a Plettenberg Predator 30-8 and a Jetti Spin Pro 200 ESC.
I have the Jetti Box Mini but I need some help, I just don't get how connect everything so I can program the ESC. When I connect the main batts to the ESC and arm it, the ESC arms and I can control the motor speed from the TX, but when I connect the Jetti Mini to the ESC, I get nothing. I connected the non-rx cable from the ESC to the Mini and the rx cable to the receiver. The extra wire on the back of the Mini is not connected to anything.
What am i missing? Do I need to have an external power source to the Mini?
Any help is appreciated.
Larry in Denver