RCU Forums - View Single Post - Cermark LCD Power Panel Problem..
View Single Post
Old 09-18-2003 | 10:00 PM
  #2  
LittleFolk's Avatar
LittleFolk
Senior Member
 
Joined: Aug 2003
Posts: 153
Likes: 0
Received 0 Likes on 0 Posts
From: Magnolia, TX
Default RE: Cermark LCD Power Panel Problem..

Many years ago I also used a panel glow plug wire. It seemed to work too hot even on the lowest setting and I would constantly burn out glow plugs. To make a long story short, I now only use a glow starter like Hobbico's Hot-Shot and never have any problems. In fact, the panel's plug wire would sometimes get in the way of the prop. This was a real pain! The glow starter is really worth the small investment of about $15.