RE: Picco P-zero 0.8cc
So I just checked a KB. It looks like a TD cyl, and head, and a Surestart backplate. All I would have to do is open up the venturi hole a bit, and maybe make a cutter or something to shave off the piston a bit? I already have a mylar reed someplace too, in a Black Widow or something I can raid. I know we tried a Babe Bee with a 1/8" bore and on a bladder with 80% nitro that ran very well. TD cyl and plug. I think it swallowed reeds, but that was before the mylar ones were on the scene. Looks like I have to spend/waste some time on the reedies again :-( I can't even use them at the field without a muffler. Maybe my neighbors field is big enough. Oh I still like the AP and ASP's made in the last two or three years. The GZ .049 and CS .049 not so much. Had some nasty Ucktams too. Russian motors are either boogie or bust.