Robart Electric Retract Question- 510RSE
I posted this question in the Kit section, but didn't get a response. Maybe here I will have better luck.My 40 size Royal Zero build has been on hold for several months now due to the Robart Retracts I chose to go with have been on back order. I ordered the 510RSE which are 3/8 Robo Strut ready. I hook everything up and they run up and down great, they are well made and now I'm all excited about getting back to work. So, I fit the Robo Strut and it just flops around in the trunion. I measure everything and the strut is 3/8, but the mounting hole in the trunion is 7/16. I was expecting a slip fit. I searched for maybe an adapter, but couldn't find anything. I sent an email to Robart with my question, but with it being Saturday, I'm not expecting to hear anything until Monday. I thought I would run this by here for your thoughts. These are my first set of Robarts, and don't know if I'm missing something or if I have a missed drilled set of gear.Thanks in advance for your input.