ok Cees
I think I see what you mean. looking at the two photos I guess the dark blue bottom on the
fuselage does seem to make it appear more slender.

have my wing to the point of attaching the leading edge and I read somewhere that the best way
was take a 4" wide sheet and mark a center line down the center, to thru the curvature process
and center the line on the leading portion of the ribs. apply glue to the bottom portion let dry and
continue gluing process, then when dry continue with rest of top and bottom leading edge attachment.
sound practical? your thoughts here or your method of application.

again many thanks for all your help and suggestions.

happy flying
pt19 flyer
joe