Originally Posted by
Dr Honda
GSR: OK. I didn't see a wren marking on the wheel. (I put a bore scope in the center cone) So I guess I didn't get lucky on that one.
I am not sure that the back side of the wheel is marked, it might be the front side. The way I was shown to tell the difference is to look at the point where the trailing edge of the blade meets the wheel and see if there is a lump there. I don't remember if the lump was good news or bad, I'll take a look tonight and get back with you. Along time ago I posted pictures of this, but it's been so long ago I don't even remember if it was on RCU.
Steven