RE: Vtail mixing -JR8103?
One of the advantages of Joining the NMPRA is you get usefull information. The following is a copy from the newsletter, written by Vern Smith.
On top of the Transmitter right side is a knob marked "Aux 3" this has to be disabled (Inhibited). It affects affects the servo centering in glider mode (Vee- Tail)
To inhibit, Go to the menu item [D/FLAP T.] TRIM and press the + or - button until INH appears on the screen. This will inhibit the Aux 3 knob.
Ed S