Well, if I were to pust more pics on the setup, you would see I am pretty particular with the way I put it together. I am mostly done with Reactors for a bit of time but this was put together for the demo and once that is done, it will be my sunday flying airplane. So I took particular care and used some of my best hardware. Still ending up with this problem is a real bummer.
Moving forward. I am getting my heatgun to try and take some warp out of the elevator. Asking one side to do all the de-warping is meaningless so I am going to do a bit on both sides. Will try and get the TEs atleast in line. Lets see how it comes out
Ameyam