Originally Posted by K-H2o

Mr. Ronk- Maybe the lost in shipping is a blessing in disguise. It is incouraging to know that the HK order I made on Dec. 30 still has a chance of arriving sometime soon. I knew I was doing something I might regret ordering then!!
So if you want to make that thing go good get one of these
http://www.offshoreelectrics.com/pro...o-2860&cat=148 or
http://www.offshoreelectrics.com/pro...o-3650&cat=148 And an airplane ESC of about 75 to 100 Amp. I use Castle. It will need to have some kind of metal body you can glue cooling tubes on ( see my post photo ) or be ready to go to a surface radio. With a 2 channel radio you can run a Y harnes and do 2 servos in one channel, if you don't have any servo mixing. Dude servo will need to be MG and around 150 or more oz.in. torque.
OSE has great props and the owner ( Steven ) is really helpful. I know you blew the kids collage fund on the new boat but you gotta be able to find some spare change under the sofa to get the Shark flying !!! 3 cell and you can jump from wake to wake, but watch out you will need to reinforce his legs or you will blow him off and brake his ankles. KH

Originally Posted by YPC

make up and wardrobe done ......head will still receive a light coat of clear epoxy.
The rash vest is a tight fitting Lycra - adds dimension to Bro's figure and helps
stand out in the surf (various colour options)

Can't get more authentic than Neoprene and Lycra ....