RCU Forums - View Single Post - "Building" an ARF or RTF (?)
View Single Post
Old 02-18-2014 | 01:42 PM
  #4  
RCKen's Avatar
RCKen
RCU Forum Manager/Admin
My Feedback: (9)
 
Joined: Jul 2002
Posts: 28,236
Likes: 0
Received 31 Likes on 27 Posts
From: Lawton, OK
Default

Boy I sure wish my old pal (and Jim's brother) Minnflyer was still around. This was one of his favorite subjects. There a couple of things that he used to say about kits vs ARF's. First putting together planes was the hobby and flying them was the sport. And we build kits and we assemble ARF's. Like Jim said, it's really a good way to start a war here, but if you look at it in it's basic form that's what it all boils down to. When you pull an ARF out of the box most of the major building has already been done for you. All you are doing is then assembling the major parts into the final plane. But when you pull out the parts for a kit you are building those parts into the same major parts that the ARF used, and then assembling them into the final plane. So in actuality you are really doing both with a kit, building and assembling!!!

Ken