RCU Forums - View Single Post - Building a Dynaflite Super Decathlon
View Single Post
Old 03-14-2014 | 02:29 PM
  #1897  
ScaleRCpilot's Avatar
ScaleRCpilot
My Feedback: (1)
 
Joined: Apr 2003
Posts: 145
Received 0 Likes on 0 Posts
From: Houston, Houston ,TX TX
Default

funnotcrazy....I live in Highlands, TX and am a member of http://www.propnuts.com/ Club we fly off a grass runway over a grass farm. Propnuts is and may be one of the oldest R/C clubs in Houston. I have a 16/6 (not sure on the pitch due to the spinner) Master Airscrew K-Series and I have been using Omega 10% but may have to switch to Ritches Brew soon. My source ( Odessy Hobbies) for Omega dried up and the local Hobby shop (Razor) carries RBrew. It should run fine I'v used RB 10% before and had no problems but everyone has thier favorite.

I built it back in 08 and it has been a work in progress. It has about 5 flights on it and I am not real excited about the planes flying performance. So I am making adjustments and changing things - I used to have a Sullivan on board glow plug lighter but found the Saito 180 to idol just fine without it- so I removed it and the battery. I am going to change the 2.3 G radio to duel recievers for safety.

And I'v got to change that dihedrel in that wing! Come on out to the April swap meet!
Question : Is your Saito 180 mounted inverted (with the engine upside down) ?