RCU Forums - View Single Post - Caculating gas to elect.
Thread
:
Caculating gas to elect.
View Single Post
03-31-2014 | 01:26 PM
#
4
flyinwalenda
My Feedback: (
5
)
Joined:
Oct 2009
Posts:
3,975
Likes: 0
Received 1 Like on
1 Post
From:
Northeast, PA
This set-up should fly it:
2 X
http://www.horizonhobby.com/products...95kv-EFLM4110A
2 X
http://www.horizonhobby.com/products...c-CSE010011100
2 X
http://www.buddyrc.com/glacier-35c-5300mah-5s1p.html
2 X
http://www.buddyrc.com/glacier-35c-5300mah-4s1p.html
This one would provide more power if you wanted to use 3 blade props:
2 X
http://www.horizonhobby.com/products...45kv-EFLM4160A
2 X
http://www.horizonhobby.com/products...c-CSE010011000
4 X
http://www.buddyrc.com/glacier-35c-5300mah-5s1p.html
Add some more $$ in for extension wiring, plugs, etc...
If this is your first electric plane then add about $100-$225 for a decent charger
Last edited by flyinwalenda; 03-31-2014 at
01:33 PM
.
Reply
Like
flyinwalenda
View Public Profile
Send a private message to flyinwalenda
Find More Posts by flyinwalenda
View iTrader Profile