RCU Forums - View Single Post - Hurc 40 and Hurc 18 problems getting full throttle from motor
Thread: Hurc 40 and Hurc 18 problems getting full throttle from motor
View Single Post
Old 04-06-2014, 05:07 AM
  #1  
cvint
 
Join Date: Mar 2008
Location: Indy, IN
Posts: 75
Likes: 0
Received 0 Likes on 0 Posts
Default Hurc 40 and Hurc 18 problems getting full throttle from motor
Set up: hitec Flash 5 transmitter and hitec 555 receiver ; E Max GF 2215/15 motor (kv 1470 max current 24 amps) 2 Futaba S133servos; 7-5 APC electric prop.
Tried both Hurc 40 and Hurc 18 with this set up. 1300 30c 3 cell lipo. Only drawing 6.5 amps and 70 watts at full throttle with both esc-should be getting at least
16-17 amps at full throttle. Any thoughts?

Thanks
cvint is offline  
Reply Like