just wondering how long I will get out of my 2s 4000mah lipos on a 2858 2618kv motor?
I got the parts today. I replaced the servo and cable tied it in but it was moving around so I used some epoxy to hold it in place. I couldnt test it out as I had to wait for the epoxy to dry. I had to limit the throw as its close to the post but i should have enough steering. I will try and get a video soon when I go back to dads.
The 2s 4000mah lipos are nice and flat and fit in the surfer nicely. They should work well. I didnt get a chance to test them out on the motor yet but they should work ok.
I should be able to get some test runs in this weekend if all goes well.