RCU Forums - View Single Post - Align t-rex 600n project
Thread: Align t-rex 600n project
View Single Post
Old 07-16-2014 | 03:23 AM
  #21  
Zor
Banned
 
Joined: Feb 2009
Posts: 3,524
Likes: 0
Received 1 Like on 1 Post
From: Ontario, ON, CANADA
Default Following along
Originally Posted by flyingjmerritt

i did manage to get a new gas tank.fuel filter,fuel line,hardware that i bought on a parts lot on ebay.
now just need to go to the hardware store and buy some thin safety wire. so i can secure the clunk valve in the fuel tank so it don't come off the fuel line.
then i can install that. still working on getting the landing skids,and buying a new engine as i get the money. new engine is around $300! i have about $177 so i'm getting close to buying the new motor for it.
Good morning flyingjmerritt,

You are making some progress and that is encouraging.
Just letting you know that I am subscribed and have a note whenever you post.

Being a hobby there should be no rush. You will get there sometime at your own leisure and financial situation.

Best of luck and take care.

Zor
Last edited by Zor; 07-16-2014 at 03:33 AM. Reason: Fixing typo
Zor is offline  
Reply Like