RCU Forums - View Single Post - Brison 3.2 stalls
Thread: Brison 3.2 stalls
View Single Post
Old 09-02-2014 | 11:04 AM
  #6  
speedracerntrixie's Avatar
speedracerntrixie
My Feedback: (29)
 
Joined: Jun 2010
Posts: 9,704
Received 200 Likes on 172 Posts
From: Happy Valley, Oregon
Default
Check the metering needle activation fork. It should be parallel with the carb body. If it has been adjusted too far in it will do as described.
speedracerntrixie is offline  
Reply Like