Originally Posted by
mick15
It is also incompatible with CAA requirements (twin Rx input) another request for information answered incorrectly. I remain interested to understand how to integrate the Cortex into the 18/2018 setup and at which point does the PWM output become sBus!
m
Apologies if I'm wrong but I believe that the Robbe 2018 has an S-Bus output. The Cortex can therefore be supplied with an S-Bus signal after the Robbe 2018 and the servos would be supplied with PWM from the Cortex. As stated earlier, the Cortex does not have an S-Bus output. The Robbe can be supplied with 2 receivers which may or may not satisfy the LMA (I would need to ask an inspector to be sure).
If you remain unhappy then please contact Bavarian Demon and explain to to them. They are good people and I'm 100 per cent sure they haven't intentionally supplied false information; that would not be in their interests.