It's a Great Planes Extra 300S kit and is fully covered now. I usually go with the recommended engine but decided to go with the bigger engine this time but didn't realize that the plane would be this nose heavy. The recommended engines for the kit .61 to .91 2 stroke and .91 to 1.20 4 stroke. I'm using the OS FS-120S III 4 stroke. All of the servos are mounted per the build plans. I could move the servos towards the tail but would only gain about an inch or two further from the engine. I don't know if its worth it. I'll take some pic's to provide more detail. I've built planes for many years but had a brain fart on this one. Thanks for the feedback.