Thanks for reminding me about the use of an ammeter, I remembered I made one up years ago, and I used a multimeter on the current setting.
So I have just started to set the control surfaces using the ammeter.
As limits, I wonder why the preset servo limit is 125 plus and minus, surely 100 would have been better as a starting point, as only very seldom have I had to use more than 100 on any plane.

Regards
Ross

ps next to work out how to set up the various functions such as takeoff, thermal, normal and speed etc
So any advice to start me on that track would be helpful.
pps After this plane is done, especially with the 2 micros, setting up the next one will be easy.