Thanks for the words of encouragement! I will try to keep updating this as a build thread as TomCrump suggested. I got the kit today and checked out the pieces for damage. So far so good. Then I unrolled the plans and found out my building table is not big enough to lay the plans out completely. I built a work bench exactly like the one in the manual and used a 30x80 interior door. I guess I will have to move the plans as I build different sections. The manual says to separate all the parts and label them. Seems like a pain and a good way to lose parts. Is it really necessary to do that? Or can I take what I need as I need it like building a car kit?