Now to start with the left wing. another complication for me is that Earnie wants a 2 piece wing similar to the ARF. I like using these magnets to hold ribs perpendicular to table. I get the shakes when trying to hold things in place. Due to the 2 piece wing I have made rib doublers out of 3/16 birch ply for the outer rib W1 and the first W2, cutting out area for a straight piece of aluminum bar to join the wing (as with the ARF version). I made the inner W1 to kick out below and with a nose in the leading edge that, hopefully will set into a receiving notch in the cabin to lock in the leading edge and help keep the 2 piece wing together in flight. Straight and level so far........ok now trying to figure how to get these pics in again!!