Hey guys I recently bought a Taigen KV2 from Immortal Hobbies and had them install a clark board prior to delivery. Tank arrived but it BARELY turns at all so they sent me a remote to try and reprogram the steering. I followed the instructions that they sent me but I cant get the settings to change for some reason and was hoping maybe one of you guys could help. The instructions say to install the jumper into J2 and turn power on. Then it says to point the remote at the TBU and hit the button for which setting you want it to change which would be the mute button for steering. It says the indicator on the TBU is suppose to flash but I don't see anything flashing, Any ideas or help is greatly appreciated.