Ron, I do not know who owns Bonzi, but in 2000 or 2001 I stopped in on the then company in Indianapolis when I was trying to buy a large hull for myself. They were advertising an 84" hull, but when I was on their premises they had not even built a plug! I came back to Colorado and built my 73" Cigarette scale model plug of the 36' Cig, and had molds made. I only wanted my hull, but Rich from Thunder Pro in NJ asked me to supply him with hulls. I did sell him 20+ hulls over two years, but as with most modeling projects the economics were just not there. I was not doing this in my garage. I still have the molds, and my hull at 18 lbs would easily handle one twin inline, but not two! My hull was built by a professional fiberglass fabricator to my specs which were based on a full sized boat. I have personally built four full sized boats to 35' and a dozen models. I still have my all carbon hull #1 with twin 26cc full mod Zenoahs and MHZ Merc #6 outdrives, but there is no longer a place in Colorado to run it safely even when the ice melts. I retailed the hulls for $750 plus shipping via FedEx, and it still was not worth my time and expense. I remember some people complaining about the price, and just was disgusted with their total lack of understanding on what it took to actually design and manufacture a hull professionally. Lost my interest at that time after Rich died in 2005 trying to supply a product to a market that was just not worth the effort. It is just beyond most hobbyist's understanding as far as the economics are concerned. I do believe that I have digressed into a bit of a rant. Sorry!