RCU Forums - View Single Post - New Hangar 9 30cc Spitfire! Build Thread, i got mine!
Thread: New Hangar 9 30cc Spitfire! Build Thread, i got mine!
View Single Post
Old 01-25-2015, 10:55 AM
  #197  
Dave Bugz
Senior Member
 
Join Date: Mar 2009
Location: London, , UNITED KINGDOM
Posts: 126
Likes: 0
Received 0 Likes on 0 Posts
Default
Originally Posted by Scott Douglas
Been away from it all for a while but have some time again. My cockpit kit was a disaster (long story but basically the service from the old Inzpan was crap.. sent a mix of 1/5 and 1/4 scales and stopped trading) but it is what it is (Aerocockpit never responded to any of my numerous e-mails either) but you probably wont see much of it anyway....





The Laser 180 fits nice although there's an issue with the carb being very low that I need to work on.. may look at making a remote needle...

Scott, the guy with the Laser 180 in my club flew his recently and it went well, flew very scale. What he did was cut out the plate that the original tank sits on and it lowered it by about an inch over standard. Drilled a new hole in the fire wall for the pipes to exit and he had no problems.
Dave
Dave Bugz is offline  
Reply Like