RE: TF 1/5 Scale P-51 ARF Assembly Thread
Hello, this is a response to those that are planning to run the fixed landing gear. I have the WM GS P-51D and my flying buddy has the Hangar 9 1.50 size P-51D. Both planes have a Moki 2.10 spinning an APC 18x12. His was radared at 130mph straight and level and mine comes in slightly behind-125mph.
I've been using the mechanical retracts and have recently had a problem with the two servos that has forced me to lock the retracts down and unplug the servos. This allows me to keep flying the plane until I can afford Robarts, SpringAirs, etc.
Here's my point--We normally fly wide open and in somewhat of a formation. Kinda cool to watch, if I do say so. However, this was the first day that I've had to lock the retracts down, and my buddy had to throttle back to half throttle +/- while I was still wide open to keep us at the same speed. WOW. I did not know that the gear produced that much drag. Still fun to fly but it is definitely slower.........
Will need to get some good retracts soon.