I have a digital set of plans already for the Aquila but a guy at the club field a few weeks back who has a fiberglass fuse Aguila kit said he will sell it to me for $40.
Well I was able to fully epoxy in the sleeves on both wings the way Dave suggested and install the rest of the sheer webs. I released all the outboard wing ribs too and should have them framed up tomorrow. As for the electric power on the Riser here is what I was thinking:
1. E480/1100Kv Outrunner motor
2. 30a brushless ESC
3. 11.1v/30c/1300mah battery
4. 13x6e folding prop