Thanks a million for your kind offer Robert. However, I am invested in the rout I have begun and will press on.
Iteration 3 is in the bag. Making sure both 6 oz plys were down (as I was negligent in iter 2) and then manipulation of bag and breather cloth ( thumb deeply planted in big end, pinky implanted in small end) then pump on. I believe I have solid press up.
I added another parting plane at the opening of the cowl mold because I want a flange there.
I then waxed on, waxed off Danielson, X 3 then pva. Then applied Jell Coat.
Off to layup last part of cowl mold. WooHoo !!!
Kevin