RCU Forums - View Single Post - MAAC 3d safety rules
View Single Post
Old 10-15-2003 | 12:34 PM
  #13  
southern_touch9
Senior Member
My Feedback: (3)
 
Joined: Jul 2003
Posts: 1,549
Likes: 0
Received 0 Likes on 0 Posts
From: Columbus, GA
Default RE: MAAC 3d safety rules

Actually midairs are pretty common during torque rolls and hovers I always see several of these each year. 99% of the time it is always caused b/c of the idiot hovering is doing so in the middle of the runway with 10-15 other airplanes in the air at the same time making low passes. I always hover very low and in the center of the runway but I do so only when the traffic is very low at the field.