I got a late start, but i got started...
First up was taping off the flanges of the fuse mold and then it was sprayed with primer.
The first layer of glass was then put in and allowed to gell over.
While i was doing the initial layer in the big molds, i did the lower wing fillets and through those in a vacuum bag.
While that initial layer was curing, i had lunch and cut all the glass and carbon fiber layers for the big parts
I them did the layup to the left fuse half and stuck it in a vacuum bag to cure.
I would have done the other side, but it was 11pm by the time i got done, so ill do it tomorrow.
I also pulled the windscreen from the mold. It came out fairly well, the next one i have an idea on how to make it perfect.
