I have parts coming from BUSA, Tower, and Agape Racing & Hobby. While I'm waiting I thought I would work on the bottom wing. The left lower wing panel basically separated from the center section and broke the plywood dihethral braces so I rejoined the two, sistered up some hardwood, and then replaced the sheeting. The right lower panel is not complete as part of it is scattered over Mercer County, New Jersey. I'll replace and rejoin that side when the parts come in from BUSA. The right lower wing tip was the only one damaged and was easily repaired and recovered. The parts to repair the engine have been ordered from Agape Racing and Hobby and cost me less than $35. Everything is moving along nicely. Life is good!