RCU Forums - View Single Post - Pitts S1-S by EMHW
Thread: Pitts S1-S by EMHW
View Single Post
Old 07-09-2015, 04:28 PM
  #5158  
drac1
My Feedback: (4)
 
drac1's Avatar
 
Join Date: Jul 2008
Location: Romaine, Tasmania, AUSTRALIA
Posts: 1,737
Received 7 Likes on 7 Posts
Default
Originally Posted by John_M_
Well, adding a piece metal to the back side of the t-nut and drilling / tapping would provide more thread bite, but we were just discussing ways to prevent the screw from coming loose in the t-nut... other than using loctite, bonding a nyloc nut would prevent the screw from coming loose, but may be more work making it than the actual benefits.


John M,
Yep. OK.

I've always used blue or red loctite and never had any screws comes lose.
Last edited by drac1; 07-09-2015 at 04:30 PM.
drac1 is offline  
Reply Like