V2 Rider,
The Plane has many flights on it without issue. This was the first rough landing though. I did recieve an email from robart today telling me they are working hard on resolving the problem with these pins and that they will get back to me in about a week. In the meantime I am planning on drilling out the soft pins and welding in some 1/4 Inch drillshafts. they should be hard enough.
I cut the Keleo at 33mm, measured on the side. It stands out about 3,5mm. But please check with your plane, I changed the mounting of my cowl conciderably so there may be some tolerance in there...
rgds,
Philipp